CAMSHAFTS

VALVETRAIN

STROKER KITS

RODS

PISTONS

MITSUBISHI 6G72 The Mitsubishi/DSM 6G72 engine platform is 3.0L displacement featuring a bore size of 91.1 mm (3.590") and stroke is 76 mm (3.000"). The camshafts listed below are for the DOHC 24-valve version was used in a variety Mitsubishi and Dodge chassis but most notably this engine is found in the Mitsubishi 3000GT and Dodge Stealth vehicle applications. It has a cast iron engine block and aluminum cylinder heads. The DOHC 24-Valve produces 222 horsepower and 205 foot pounds of torque in naturally aspirated form, and as much as 320 horsepower and 315 foot pounds of torque in turbocharged form direct from the factory.

Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Dyno Shop Status Street/Strip Specification Map tuning necessary. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK. BC0141 272°/272° 212°/212° .401"/.381" 10.18/9.66 BC0140 In-Stock Race Specification Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0100. BC0142 280°/280° 218°/216° .422"/.418" 10.71/10.60 BC0140 In-Stock Performance Regrinds An economical alternative to new cams, BC offers custom regrinds on OEM style cores. No core exchange required. Use OEM springs BC0145 264°/264° 210°/210° .365"/.365" 9.27/9.27 Stock In-Stock USDM 6G72 Stock 256°/256° 200°/200° .349"/.350" 8.89/8.89

619.825.8719 ph 619.825.9675 info@briancrower.com	Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application. Warranty Information Copyright © Brian Crower Inc. All rights reserved.